M-BS0000Y touchless roll-over bus wash is designed for bus depots and commercial fleet washing facilities. Its contour-following top sprayer and 15 rotating spray nozzles per side provide touchless exterior cleaning. The system supports automatic chemical dosing for presoak, foam and wax, with optional oscillating air dryers, wash-count tracking, fault alarms and freeze protection to support fleet maintenance operations.

Product Details

The Touchless Roll-over Bus Wash M-BS0000Y is an automatic bus washing machine designed for commercial bus depots, fleet operators, and vehicle maintenance facilities. Its touchless washing method uses rotating high-pressure spray systems and automatic chemical application to clean bus exteriors without relying on direct brush contact.

The machine features a contour-following top sprayer with a lifting spray arm that adjusts to the height and shape of the bus. This design helps maintain spray coverage across different roof profiles and exterior contours. On each side, a system of 15 rotating spray nozzles provides broad washing coverage to support consistent cleaning of large vehicle surfaces.

With a stated washing capacity of 10–12 buses per hour, the M-BS0000Y is intended for fleet washing operations that require regular vehicle turnaround. Actual throughput depends on bus dimensions, soil levels, wash program settings, site layout, and operating conditions, so the rated capacity should be confirmed against the intended application.

An automatic chemical mixing system uses dosing pumps to apply presoak solution, foam, and wax during the washing process. Appropriate chemical selection and dosing settings help support cleaning consistency. Buyers should confirm the compatible chemical types, recommended concentrations, and any water-quality requirements before commissioning the equipment.

Two oscillating air drying systems, positioned at the top and sides, are available as an optional configuration. These dryers help remove residual water after washing. Since the air drying system is optional, buyers should verify whether it is included in the quoted package and confirm the required drying performance for their fleet operation.

For operational monitoring, the machine includes wash-count tracking, automatic fault detection, shutdown, and alarm functions. Its freeze protection system automatically drains water lines to help reduce the risk of freezing and pipe damage in cold weather. An optional low-temperature start-stop function can stop the machine when the temperature falls below 4°C; this feature should be confirmed separately when selecting the configuration.

The M-BS0000Y provides a touchless bus washing solution for operators looking to standardize exterior cleaning across a fleet. Before installation, buyers should confirm compatible vehicle dimensions, spray pressure and flow requirements, electrical specifications, water supply and drainage, chemical system configuration, and available installation space with the manufacturer.

Key Features

1. Contour-Following Top Sprayer: A lifting spray arm adjusts to bus height and shape to help maintain exterior spray coverage.

2. Fifteen Rotating Nozzles per Side: Rotating side spray systems provide broad touchless washing coverage across bus exterior surfaces.

3. Touchless Washing Process: Uses spray-based cleaning without direct brush contact with the vehicle body.

4. Rated Capacity of 10–12 Buses per Hour: Designed for commercial fleet washing. Actual throughput depends on operating conditions and wash program settings.

5. Optional Oscillating Air Drying: Top and side air dryers can be added to help remove residual water after washing.

6. Automatic Chemical Mixing: Dosing pumps apply presoak, foam, and wax according to the selected wash program.

7. Wash Count Statistics: Tracks wash cycles to support operational monitoring and maintenance planning.

8. Fault Detection and Safety Alarm: Supports automatic fault detection, shutdown, and alarm functions.

9. Freeze Protection: Automatically drains water lines to help reduce the risk of freezing and cold-weather damage.

10. Optional Low-Temperature Start-Stop: Can stop machine operation below 4°C, subject to the selected configuration.